why does my car shake when driving and lose power uphill?

My car randomly started jerking. It feeling like its losing power? Also it sounds like my exhaust is putting and not running right. I have a 94 Honda accord manual. Been like this a few days now. Fuel injector hasn't worked plz help

Shaking at 45, Now worse?

I have a 99 chevy k2500. Truck started shaking awhile back at 45mph. Never messed with it until my front brakes went bad. Had those replaced and a ball joint replaced. Shaking wasn't as bad, then it picked back up. Got the other ball joint replaced....shaking still occured. Got my tires rotated and balanced, shaking got worse. Three more balances the shaking has stayed the same. One tire has a "hop" and they put it up front. Very very little shaking in the steering wheel but A LOT coming from the back. Any suggestions? Drive shaft looks fine when spinning and tires are a year old.

Is the cooling fan actually working? If not then check the fuse and thermal relay. Can also be the fan itself is defective. A clogged heater core will not cause the car to overheat even though it sounds like yours is clogged. That being the case it can be, and more than likely is, that your radiator is also clogged which is your problem. Try using a commercial product like this http://www.amazon.com/gp/product/B00200S...
to flush your radiator clean. Make sure any product you buy contains no acid. That is very important. If that does not solve your problem then you are going to have to go to a shop and have it flushed by a professional . but it is worth a try yourself.

How much would it cost to fix my car?

I have the parts for my car. Like a new bumper and grill but I'm curious to know how much it would be to replace.I don't think there's damage to the frame but as you can see there's some good damage to the right side. It's a 2012 Toyota Camry.

what removes water spots on a motorcycle?

i left my bile out last night and the sprinklers got to it. it has water spots all over and i want to get them off. my exhaust is a matte finish and the rest is regular paint so i need something that works on different finishes