Is there any place i can find a high quality celty sturlson helmet from durarara.....i recently bought a black hyabusa, installed a switch operated horse noise to it, and wanted one so that i could look like her riding around.....i cant seem to find one at isnt either paper maché or decent quality....i need help finding one thats the best quality

my first time to sit a Cisco exam, so you will know how nervous I was! Thanks for them ! I passed. I think 95% questions are more or less the same as your guidance. Some questions with the answer are in the different sequence, and i have emailed them . Well, I think their guidance is still more accurate than others. The most important thing is I got passed. i think i should also pass the word to you guys, hope it can help you and other. http://www.examspress.com/C4090-450.html .

If you look on the carburetor it will have a small spring loaded screw this will change your air to fuel mixture giving you a richer burn.

Start the bike as you normally would, find the screw and turn it in or out and then slowly release the throttle to see if you have the correct mixture. You want just enough gas that it can idol properly but not too much that it will back fire or flood the engine.

I'm sure they will, but OEM steel ones do the trick. What improvement do you think ceramic bearings will provide that standard ones won't? They seem mostly to be used to squeeze absolute maximum performance out of track and drag bikes. I've owned some very fast bikes over the years, and never even ventured toward the limits with street riding.

Well it starts up my bike just fine, battery fully charged and all. Though when I hit the starter switch, the headlight lights up for a second, then when the bike is on, the headlight turns off. After the bike is on, I hit the starter again and sometimes the light turns back on. Is it a starter switch problem? Loose wiring? Bad Ground? @Valy